Polka Dot Pup is based on Madame Sausage by Ric Rac. I have had this pattern in my stash for a number of years but never got around to making it.
I say Polka Dot Pup is based on the pattern as I haven’t done it exactly like the pattern. The pattern has little Miss wearing clothing, I used polka dot fabric I found in my stash instead to create interest, had I just chosen a plain fabric I think she would still looked ok. This polka dot fabric I was finding hard to use in any project so it was good to use it in this. Sadly little Miss sat in pieces for weeks (or maybe a month or two) before I recently had a deadline and finished her. It didn’t take long to stuff her and attach her arms. I think she is rather cute looking.
Did I learn anything from this project? Yes don’t put off doing the finishing a project. Had I not put her aside once she was assembled I could have had her finished in no time. I suddenly put myself in time pressure to finish things for a deadline when I didn’t need to had I finished them in the first place. Sometimes I have the attention span of a fruit fly and jump from one project to the next but that sometimes (ok often) means I don’t get projects finished. I think I need to stop and refocus and finish things to the end so I get them completed and off my to craft list.
I have mentioned before I have an owl loving niece. I’m always looking out for new owl patterns so I can make her a different one each year. Sadly this year the pattern I chose wasn’t working for me so I put it in the naughty corner and this little guy came to the rescue.
I made this pattern for this years Softies For Mirabel toy drive. The pattern is Simplicity 1549. I found this fabric in my stash and thought it was perfect. The fabric is very crisp so it holds its shape for the toy well. I really like how it is the same print but in the contrasting colours, the print isn’t too distracting either. Once again I added pellon to inside the wings as you don’t stuff them. For the face I thought she needed lips so I added pom-pom trim and for the eyes used flat front shank buttons.
Sewing wise this was a really easy toy to whip up as the pattern pieces are very simple. If anyone is after a really basic soft toy pattern this would be a great pattern to get started on as there not too many pieces or difficult construction. I am sure I will make this toy again.
I have made another Funky Friends Factory Platypus. This is a really great pattern as it is very straight forward.
When I first thought of making this toy I imaged it would be purple and yellow. I’m not sure why I wanted this combination maybe I was thinking the colours would be a nice contrast to each other. I poured through my stash finding suitable fabrics and hit the jackpot. You need less than 2 fat quarters to make her. Once again I put pellon in the feet on both sides just to give them some texture as you don’t stuff them and the pattern doesn’t call for you to line them. I wanted eyes to stand out so I found some in my stash, I have never done red eyes before.
Once again on its own I thought it need something else so I made her the V Stitch blanket. I tried desperately to get matching yarn but the yellow they had in the shop looked more like a dark mustard/brown and not yellow so I went with pink and purple instead. You can never go wrong with purple and pink when making gifts for young girls.
Miss Purple Plattie has arrived at her new home and is settling in nicely.
I don’t often send projects to the naughty corner for a time out but I have decided to on this toy.
This pattern is by a designer which I have made many of her toys before and loved them but this pattern just isn’t working for me at the moment. I had gotten to this stage couple of months ago and never got back to it. I don’t know what it is about this pattern but for the moment I don’t have the enthusiasm to finish it. I have had this pattern for many years in my stash and have never made it and now I am thinking I know why… It isn’t screaming out “make me finish me” like other toy patterns have done. This was due to be a gift for my niece and I have come up with plan b (a different owl pattern) This one shall sit in the naughty corner and eventually I will finish it off and donate it to Softies for Mirabel. I hate seeing waste and if I was to just bin it (which I could never do) this would be a waste of fabric, wool felt and time so I will just set it aside for now. I’m trying to keep sewing fun for myself so I have decided if I don’t find the project fun or love it I’m not going to sew it. I’m sure this project will be fun one day but just not a the moment.
There is a new lady guinea pig in town Gertrude.
Gertrude is the latest toy from Funky Friends Factory. I seem to be making a lot of Funky Friends Factory toys of late but it was love at first sight when I saw this toy and I instantly went and purchased her. She will be a gift for a 3 year old next month.
This toy is a great scrap busting project and I made her all from scraps but you could also do it from a set piece of fabric or two. This is not a difficult toy like some of the FFF toys can be but I will be honest and say I did struggle with trying to get the pattern pieces to fit with the scraps. Some pieces were easy other pieces you had to do one in reverse and it got me. I messed up 2 pieces during the cutting stage but luckily I was able to salvage them or cut more and later towards the end I discovered a big boo boo which I think related back to the cutting in reverse issue. I think if I slowed down and really thought before I cut I could have avoided a few errors but I must admit I was just wanting to jump in and make her.
Sewing wise I didn’t have really any issues with her. I did a lot of hand tacking first and she even has stuffed limbs! For those who have read my previous posts about toys know I hate sewing in stuffed limbs. I hand tacked each limb then went over each one with a basting stitch on the machine so by the time it came to sandwiching them in between a seam they were not going anywhere. On some seams as I was reversing or starting the seam my sewing throat did eat the fabric a few times, when I got to the ears which were light weight and had nothing in between them they jammed down in the feed dogs. To over come this I cut a narrow strip of tear away stabiliser (about an inch wide) and used that just under the tip of each piece. It feed much easier through my machine and didn’t jam. I then just tore it off after I finished that section. When it came to do the other end of the ear I grabbed my strip again and placed it underneath, once again it didn’t jam. I’m now going to always have a piece next to my machine to use on ends when it looks like my machine will eat the fabric. If you didn’t have tear away tissue paper or even a bit of old computer paper or envelope would also work. It was easy to pull away from the seam line at the end.
So my big boo boo. Once I had sewn on the head I noticed she had a hunchback (Kyphosis – yes I looked up the official terminology) I laughed and called her the Hunchback of Notre Piggy but she didn’t look right. At first I was going to leave her but she looked like a rhino or buffalo not a guinea pig. It was when I looked at the pattern pieces again I realised I had cut one the wrong direction or got confused which was the way I was meant to pin it on the fabric or something along those lines. At this stage I only had 2 small seams to do to close her and I really didn’t want to pull her apart and start from scratch or ditch her. I decided to do a bit of cosmetic surgery to remove her hump.
From mid way down her spine to her head I pinned her and drew a curve with a pen. I machine stitched from my original seam line on her back to down past where her head was joined. I went over the seam twice then cut the hump away with pinky shears.
She looked much better after her surgery and it was a very simple way to fix her. Ok so she is a little more rounder than the one in the picture but I have never known a skinny pig, all the ones I have ever owned became round.
Pauline has created a tutorial to go along with this toy. I only followed it in sections as the construction of this one is pretty straight forward. If I was to make another one I would as mentioned take more time to make sure all my pattern pieces were the right way up. I need to do more research on how to easily do one piece in reverse. I tend to cut my pieces double layers, for non directional fabric that isn’t an issue but if I am working with scraps or want things the same direction I need to learn some tricks. She was fairly quick to sew up. Her facial features were just some leftover wool felt scraps from my stash.
Don’t be put off by my little adventure with her she is a fantastic toy. She is a nice size too, great for cuddles, now I want to be a 3 year old so I can have one too.
Introducing Brutus the Bulldog. Brutus is for a gift for a new born who is from a Canterbury Bulldogs mad family. I just had to make baby’s first bulldog. I’m calling this one Brutus after the team’s mascot.
To create Brutus I used Butch by Funky Friends Factory. I will not lie this is the most complicated toy I have ever made. Luckily Pauline has created a great step by step tutorial on how to make this pattern which I followed otherwise I would have really struggled with this pattern. This is not a beginner’s toy. Funky Friend Factory patterns are great but sometimes they can be a little hard to follow, they have more written instructions without step by step photos. If you are a visual person like me you tend to get a bit confused in them as they are very wordy if that makes sense. I had my tablet set up on my craft table and followed each step in the tutorial and it made it fairly easy.
Pattern labels were a must for this project. There are 21 different pieces! Some pieces you only cut one piece of fabric some you cut 4. I pinned all my pieces to my fabric before cutting and had my labels ready to go so as soon as a piece was cut I pinned a label onto it and put it on my ironing board. When I need a particular piece I went to my ironing board and grabbed it easily.
For the eyes I used wool felt scraps that I cut into circles. For the pupils I did French knots before stitching the eyes to the head. I love diving into my wool felt scraps whenever I need small pieces for facial features, you can always find just what you need. One step you could do differently to the instructions order is the facial features. Once you finish piecing the head you could do the hand sewing of the nose, eyes, tongue and teeth. The instructions have you put the head aside and come back later to hand sew these on. I was doing this toy in stages to give myself a break from it at the sewing machine and had I realised about the head I could have worked on it during my downtime from the machine. I did buy all the fabric for him. I went to my local quilt shop and looked for fabric that looked like it had texture but didn’t necessarily look like fur. I’m really happy that I was able find this bubble print fabric and get it in both a darker and lighter shade, it gives the appearance of texture but doesn’t scream out I am a printed fabric.
I worked on this toy over the Easter long weekend and finished him the following weekend. One day I traced out all the pieces, next day I cut all the pieces, next day started sewing him in stages etc. I did a lot of hand tacking on this toy, it took longer but I think I saved myself time as I didn’t have to keep redoing my seams. The only piece I unpicked was his forehead as it was off centre. I will be honest even with all the checking and tacking that I did after I stuffed him I found a tiny hole in his outer leg seam on one leg. Luckily I was able hand stitch it closed and you can’t really see it. Next time I will check even more. The hand tacking was without doubt worth doing. Even though he was such a complicated toy he wasn’t stressful to sew as I wasn’t getting flustered on all the curves and odd shaped seams.
Even though I am not a big Bulldogs supporter now they were my first football team as a kid. All these years on it was very ironic that I ended up making mascots representing the Bulldog and Eels around the same time. We had a family friend who was a big Eel’s supporter and at the age of 2 years old I was going for the Bulldogs just to annoy her. One of my earliest memories is going to her house on Grand Final day when our two teams were playing each other, under my jacket I had the Bulldog motives from the newspaper pinned to my jumper and I took my jacket off and showed her just to stir her up. I still don’t like the Eels but I had to get a photo of these two together.
I have made more pillows using McCalls 3274. These make quick and easy gifts.
The L pillow was very easy to do and I would say the easiest letter in the alphabet to make as you really don’t have that many angles to push stuffing around into. With some of the letters I had to modify the shape a little but with the L it is very clear so perfect.
On this M pillow I did change the shape around a little. The letters are all in a bubble font style so they are meant to be curvy and puffy but on some letters it means you can’t really tell what they are. On this M I made it is so the middle point was more prominent allowing you to see the shape more. I also changed the position of the turning gap which is your stuffing gap so that made stuffing the angles easier, alternatively you could do 2 stuffing gaps (one on each straight side) to make stuffing easier.
The I pillow I modified a lot. The original pattern is just a long centre piece with a rounded top and bottom that is it. I didn’t like the shape you couldn’t tell straight away it was a letter so I added to the top and bottom bar. In hindsight perhaps I should have made the 2 ends wider as it does look a bit anchorish but you can still easily tell it is a letter I.
The fabrics used was some leftovers I found in my stash. From a distance it looks stripy but when you get closer you can see a white floral pattern on it so it is child like but can see be teenageish as the kids get older. I still have more of these to make later this year. It is a great pattern for the stash even if you do modify some of it.