Last year I got a pattern to make fabric covered headbands and this year I have finally made some.
The pattern is by Arjay Creations. I made the slim line version of these so my fabric covering was the same size all around the headband. You can make them so they are wider in the middle. This is great scrap busting project as all of the fabrics used came from my scrap stash. To stitch them I used a mauve coloured thread as it was contrasting to all the fabrics used. These will be added to the gifts of four girls, on 2 of the headbands I have used leftover scraps from previous projects I have made the same girls. I like it when I can repeat a fabric in a different gift for the same child, they might not notice it but I do.
Even though the pattern said to measure your pattern piece against the headband as some are of different lengths I didn’t so my fabric tubes were too long. Easy fixed once the fabric was on the headbands I top stitched the opening gap closed then folded over the excess fabric and hand stitched in to the inside of the headband. Your hair covers that part of the headband so you only see it if you take it off.
As a kid I was a big headband wearer so I really like these.
For a while now I have wanted to make some sort of tray that you could collapse when not in use and finally I have made one. I found a free pattern on Craftsy by Angie’s Bits and Pieces. This is a really basic pattern to make and it took about an hour from start to finish to do so super quick to make up.
I’m going to be using this one as a money tray that will live in my sewing tote for when I go to Sewing Guild. I collect the member’s dues each month and I’m always searching for something to keep the money in so people have one spot to place it. This tray is perfect.
The fabric I used was the scraps I had leftover from making the Watermelon bags. I pieced them together to make them wide enough. My finished tray is a little narrower than the pattern, however the pattern can be made any size you want so you can go larger or smaller. Instead of batting I fused stabiliser to the back of the fabrics, because I want to carry money in it I wanted it to be a little more sturdy. I used of offcuts of pieces of stabiliser I had so it was good to use them up in a project.
I want to put snaps on everything after getting my snap press earlier this year. The snaps work well on this as they make it quick to undo and collapse down. You could also use Velcro or if you want to get more decorative use buttons. This tray would make a cute gift for anyone to use. I could see these in a little kids rooms filled with their treasures or filled with sweet treats on someone’s work desk.
I’m sure I’ll be making these again.
Sometimes a stitchery just says to you “Buy me, I will be useful in something you just don’t know what yet” and that was a case here. Jodie aka Ric Rac recently released a new stitchery Great Scott. The pattern steps you through how to make the piece into a babies rattle but you can use the design on anything. Here I have used it as the central panel on a toddler’s shoulder bag. I traced the design onto a piece of pink scrap fabric I found in my stash that was just the right size for the design. I framed it with some leftover fabric from my quillow debacle. The handle is another piece of fabric left over from the quillow. I haven’t done any hand satin stitching in sometime (2-3 years) but I somehow managed to do a resemble job on the eyes and nose.
For the back I used more of the green fabric that I pieced to make it wide enough. I really like this fabric, it must be the green with pops of pink and white that just make it seem fresh and happy.
For the inside again I used quillow leftovers. From the quillow project I was left with a few long stripes of fabric. It was too much of it to just put in my daycare donation bag and since I liked the fabric I knew I would find a use for it so I kept on to it. This project was the perfect use for it.
This bag was super quick to make up. The stitchery only took me like a day to do in front of the tv. It is only back stitching so it is quick and simple. The piecing of the bag was very quick, it is just straight line stitching. You construct it together like any other tote bag except it just a little bit smaller than most. I love raiding my scrap stash finding fabrics I can use in a project. I’m a proud of a project like this where everything used is scraps. It makes you think and get creative. For a small project like this why cut up a big bit of fabric when you only need small amounts. I’m hoping little Miss 2.5 likes her new bag this Christmas.
This little guy came out of no where but I am so proud of him.
I brought the pattern (Simplicity 8156) on a whim at the ASG Industry Day. Prior to the day I had planned out all the patterns I would be buying but on the day I remembered I needed to make a gift for a 1 year old this Christmas. I was too lazy to find an existing pattern in my stash instead I flipped through the Simplicity catalogue and came across this pattern thinking yep that will do. To be honest I wasn’t really taken by the pattern but it looked easy and it was different to the other taggie toys I’ve made. As I was going to sleep that night I had an idea.
The next morning I started work on him. I decided he would be the Hungry Little Caterpillar. I set myself a personal challenge of only using fabrics from my scrap stash. I love setting myself challenges like this as it really forces you to think. This toy was the perfect toy for a scrap challenge as you only needed small pieces for each of the various bits. I raided my scraps and found enough of everything.
I made him a little bit different to what the pattern says to. I used only cotton fabric for the body not cotton and fleece. I didn’t use ribbons instead for his legs I made my own fabric tabs from a left over piece of red cotton and for his antennas I used wool felt. I also decided he needed a tongue inside his mouth to add a bit more character. In real life I’m allergic to caterpillars so I would never have imagined myself making a Hungry Little Caterpillar 🙂 Essentially he is a taggie toy but because he doesn’t look babyish as the child grows the toy becomes a character in a book that the child can read whilst holding their little toy. Most taggies lose their use once the child stops teething. This little guy could be made for a child of any age.
I have also reviewed this pattern on Pattern Review. If you have never been on Pattern Review before and you like sewing you will find it a very interesting website. People post personal reviews on anything that you can sew, books, sewing machines. It is a very informative site.
I mentioned in Paw Patrol Bag that I cut the red fabric to use in another project well here it is.
A few weeks back I knew I was going to have a long stressful day at work. As craft is my relaxation I decided I needed to do something crafty between different meetings I had so the day before it I quickly cut out this project. I found the Paw Patrol Paw image online and used that as my shape. I used a double layer of yellow felt (from the August Sew Box) to add texture to the shape. I did basic backstitch to applique the shape in place using yellow thread from a leftover bobbin. It was very quick to cut out and very portable.
The lining is leftover scraps I used on the bag. The only item I brought was the zipper. I had no size in mind for this little pouch so just made it up as I went. Once it was all finished I did discover one small mishap with the zipper. I’m not entirely sure how this happened. I think what I should’ve done is either made the clearly longer than the zipper or made the bag smaller and shortened the zipper to size. Looking back the zipper was almost the same length as the fabric layers and I may have been worried of sewing over the metal stoppers on the zipper, if I had made the pouch larger or smaller this wouldn’t have happened. Oh well lesson learnt for next time.
This was very much a scrap busting project. All the fabrics were leftover scraps, the applique thread was leftovers from a previous project. It is a cute little pouch. This doesn’t have to be Paw Patrol related you could easily make it for any animal lover. Change the colours around to say black and white and you have a little purse for an adult, actually I may of just given away a future gift idea….
I know a little Miss soon to be 3 who loves Paw Patrol so I decided to make her a bag inspired by the show.
Ok so bear in mind I have never actually seen the cartoon I wasn’t entirely sure what to make for it so I thought the easiest thing was a bag with the logo on the front. I found this image as a free colouring in page. I traced it on to the fabric with my new light box (first major project using it) then embroidered around the traced shape. For my embroidery I do simple back stitch. It is quick and effective. I think I got all the embroidery done whilst catching up on taped shows one day.
Unfortunately the back of the bag isn’t the same colour red as the front. I originally had enough to match the front and back but made a spur of the moment decision cut the fabric in half and use it on another gift. I had more red fabric in my stash so used that. It isn’t noticeable that handle strap and back of the bag is different to the front. Once again the sewing police aren’t going to come after me.
The bag is lined with a couple of scraps of fabric I had pulled from stash. I was originally going to use these on another gift but they were on available on hand so I grabbed them and cut them for this project.
This type of bag is a really simple project to make for adult or child. You can embroider on to it any theme that the person is in to. There are so many great embroidery books and websites selling wonderful designs but I often find the easiest thing to do is google free colouring in pages for what ever theme you’re looking for. If the image isn’t the size you want print it off than play around with the sizing on your photocopier. Depending on the size area I have sometimes I enlarge images other times I decrease.
I have been making another batch of kitchen wipes for myself for a very long time. The ones I currently had were cut up old tea towels with raw edges so each time they were washed they frayed like made and became tangled with each other.
Recently going through my stash I came across some offcuts from when I made various burbcloths as gifts. I cut the towelling down into squares the various sizes that I needed (not pictured are 2 larger ones to cover animal food bowls) I then overlocked (serged) around the edges. I didn’t bother neating up the edges just cutting the tails. I only needed to do the raw edges as some were already bound as part of the towels construction. A very quick and simple project. I keep these in basket on my kitchen counter to grab whenever I have quick spills such a drops of milk on the counter, food splashes on the stove or floor. I have a used container which I place soiled ones in then just wash them with my tea towels. Using cloths like these have reduced the amount of paper towels I go through. You don’t need to use new towelling or tea towels you can recycle old ones for the project. If you want more the size of traditional paper towels just cut your squares larger.
You wouldn’t think you would learn anything from just overlocking squares but I did use this as learning project. After going through too thick of a project earlier this year and killing my overlocker I was very cautious overlocking over the bound edges. On this project I learnt how to control the speed of my overlocker with the foot pressure. You can overlocker very slow with just light pressure. When you are trying to get a thickish item under the presser foot which towels are you can guide it in. This was a useful project in more ways than one.